-
Who This Checklist Is For
-
Step 1: Decide If You Need Free or Paid Training — Before You Open a Browser
-
Step 2: Verify the TIA Portal Version Matches What You'll Actually Use
-
Step 3: Screen Free Siemens PLC Training Resources Against a Quality Bar
-
Step 4: Evaluate UK Siemens PLC Training Courses on Three Things Only
-
Step 5: Build a Real Test Bench Before You Book Any Course
-
Step 6: Wire Your Power and Charging Setup Like You Mean It
-
Step 7: Don't Confuse Consumer Control Panels and Medical Chargers With PLCs
-
Common Mistakes That Show Up in Every Round of Feedback
Who This Checklist Is For
If you're an automation tech, a systems integrator, or a maintenance engineer who's been told "go learn Siemens PLC" and then left to figure out how on your own — this is for you. Seven steps. No fluff. Each one is something I either got right by accident or got wrong with receipts.
Quick background so you know why you should trust a guy writing a checklist on the internet: I've been handling PLC commissioning and training orders for 11 years, and I've personally made (and documented) about 9 significant mistakes that together burned roughly $14,000 in wasted budget and one very awkward Monday morning meeting. So this isn't theory. It's the list I wish someone had handed me in 2015.
Step 1: Decide If You Need Free or Paid Training — Before You Open a Browser
Here's the thing most people skip: they search "siemens plc training free," land on some 40-minute YouTube video, and call it done. Or the opposite — they sign up for a $2,400 UK course before they've even touched a PLC.
Ask yourself one question: what do I need to do by next quarter?
- Just understand ladder logic and TIA Portal basics? Free training is genuinely sufficient. Siemens' own TIA Portal trial + the built-in tutorials cover more than people admit.
- Need to maintain or commission an S7-1500 line under pressure? Paid, structured training pays for itself in one avoided downtime event. I've seen a 4-hour unplanned stop cost more than a full course.
- Need a certification for job applications or client requirements? Free won't cut it. You need an accredited UK or regional training provider.
I assumed for two years that "free" was a stepping stone to "paid" — it's not always. Sometimes free covers 80% of what you need. Sometimes it covers 20% and gives you false confidence. Which leads to step 2.
Step 2: Verify the TIA Portal Version Matches What You'll Actually Use
This is the step most people — including past me — ignore. I once trained up on TIA Portal V15 in 2019, got confident, then showed up on-site to a project running V13 SP1. Fifty-plus hardware components, different firmware handling, and a project I couldn't open without migration steps I'd never practiced. That was a $600 wasted day plus a very patient client wondering why I was Googling at his desk.
Checklist item: before any training, confirm the exact TIA Portal version and PLC firmware family (S7-1200 vs S7-1500 vs legacy S7-300) that your job or target employer uses. Free tutorials from 2018 are often on V14 or V15 — still useful for concepts, but migrations to V17/V18/V19 have changed the workflow in places.
This was accurate as of Q1 2025. TIA Portal versions and course prices change every year, so verify current details with your provider or Siemens directly.
Step 3: Screen Free Siemens PLC Training Resources Against a Quality Bar
Free doesn't mean bad, but it does mean unverified. Use these four filters:
- Does it show the actual software? Screen recordings of TIA Portal being used to build and download a real project beat slides any day.
- Is the hardware model named? If a tutorial never specifies S7-1200 vs S7-1500, the specifics may not apply to your setup.
- Is it recent? Anything pre-2021 on Siemens' own channels is likely V15-or-earlier workflow.
- Does it cover the download step? So many free playlists stop at "write your ladder logic" and never show the download-to-PLC step — which is where 80% of real errors happen (missing IP config, wrong subnet, firmware mismatch).
Best free sources in my experience: Siemens' own TIA Portal trial downloads with the built-in getting-started walkthrough, and Siemens Industry Online Support's application examples. Both are free and both beat most third-party paid content I've seen.
Step 4: Evaluate UK Siemens PLC Training Courses on Three Things Only
If you're going paid — and "siemens plc training courses uk" has become a busy search term for a reason — don't get distracted by fancy landing pages. Check three things:
- Provider accreditation: Is it a Siemens-approved training partner or an independent trainer? Both can be good, but accreditation means the syllabus matches current Siemens documentation. Ask for the specific accreditation or partnership reference — don't take a logo on a website at face value.
- Hardware access: Does the course let you physically wire and download to real PLC hardware? Courses that only use simulators will leave you underprepared for the first real rack. Ask explicitly: "How many hours are hands-on with physical hardware?"
- Class size and level range: A 20-person class mixing absolute beginners with maintenance techs usually serves neither. Ask for the prerequisite level and expected headcount.
Typical 3–5 day UK classroom courses run in the £1,200–£2,500 range depending on level and location (based on quotes I collected in Q4 2024; verify current pricing — it moves). Budget for travel and possible hotel if the provider isn't local, and factor in lost billable days.
Step 5: Build a Real Test Bench Before You Book Any Course
This is the step that saves you thousands. Before committing to paid training, buy or borrow a minimal setup: an S7-1200 starter kit (CPU, power supply, a couple of digital I/O cards), a programming cable, and a basic 24V supply. Total cost of a used starter kit runs a few hundred pounds — less than a single training day.
Why? Because the first time you sit down with TIA Portal and a real PLC, you'll discover whether you actually enjoy this work or whether you're forcing it. I watched a junior tech last year spend £2,000 on a UK course before realizing he hated physical wiring and preferred SCADA/HMI design. Great training, wrong path.
The step most people skip: spend one full day just doing the download cycle. Create a trivial project with two inputs and two outputs, download it, watch it run, then break it deliberately (wrong IP, missing GSD file, unsupported firmware) and fix it. That single day taught me more than any lecture on "PLC fundamentals."
Step 6: Wire Your Power and Charging Setup Like You Mean It
Nobody tells beginners this, but a shocking amount of PLC work involves getting 24V DC and other supply voltages to your hardware correctly — which is essentially the same skill as how to hook up a battery charger. Same principles: correct polarity, correct voltage, correct current rating, proper fusing, and never trusting color codes alone.
My checklist for any powered connection, whether it's a PLC supply or a battery charger:
- Verify voltage at the source with a meter before connecting anything. Assume nothing, especially in shared cabinets.
- Check polarity twice. I once watched a reversed 24V connection take out a sensor input card — about $180 in replacement plus two hours of rework.
- Fuse the branch at the correct rating. Cheap off-brand fuses are false economy.
- Label both ends. Future-you will thank present-you. So will the next technician, who is judging your professionalism by what they find in that cabinet.
- Test with a dummy load before connecting anything expensive.
I knew I should have double-checked polarity on that sensor card job, but thought "what are the odds?" The odds caught up with me. Skip that last bullet once and you'll understand why it's there.
Step 7: Don't Confuse Consumer Control Panels and Medical Chargers With PLCs
Here's a pitfall I've seen twice now, and it's worth flagging for anyone in industrial automation looking to "apply their skills" more broadly. People see a control panel on a consumer device and think "I can reprogram that." You generally can't, and you shouldn't.
Example 1: a colleague wanted to reprogram his Traeger Pro 575 control panel to run custom cook profiles. The board is a sealed, purpose-built controller — no TIA Portal, no exposed PLC firmware, no ladder logic. He bricked it trying to flash something unofficial and had to buy a replacement panel. Learn from him.
Example 2: someone in my network tried to "upgrade" a Quantum wheelchair battery charger with industrial-style wiring to speed up charging. Medical device chargers are regulated, matched to specific battery chemistries, and using them outside spec is both a safety and a liability problem. Don't. That specific product and its specs are the manufacturer's business, not yours.
The general rule: PLC skills transfer to systems designed to be programmed. They don't transfer to sealed consumer or medical products that explicitly aren't. The brand of your trade — professional industrial automation — depends on knowing where the line is.
Common Mistakes That Show Up in Every Round of Feedback
- Training on a version you'll never use. Confirm the TIA Portal version and firmware family before you book anything.
- Skipping the download cycle in practice. Concepts are cheap; the download-and-debug loop is what actually sticks.
- Buying hardware before understanding the job. A starter kit first, then scale. I've watched people buy a full S7-1500 rack for a course project they never finished.
- Treating wiring as an afterthought. Most "PLC problems" I've debugged in the last three years came down to power and connection issues, not logic. Get the boring electrical parts right and the interesting parts get easier.
- Assuming cheap means risky and expensive means safe. Not true. Some of the best training I've had was free; some of the worst was £2,000. Screen the resource, not the price tag.
None of these are exotic. They're just the stuff nobody puts on the course description — and they're exactly the things that shape how clients and colleagues judge your work the first time they open your cabinet or read your project file. Quality on the boring details is the reputation. That's the whole game.